Package: xc3sprog (0+svn795+dfsg-4 and others)

Links for xc3sprog

Debian Resources:

Download Source Package xc3sprog:

Maintainer:

Ricardo Ribalda Delgado (QA Page)

External Resources:

Homepage [xc3sprog.sourceforge.net]

Similar packages:

JTAG flashing tool for FPGAs, CPLDs and EEPROMs

xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.

The main features include:

 - Reading a .BIT file from Xilinx design tools and programming it into an
   FPGA.
 - Reading a JEDEC file and programming it into a CPLD.
 - Programming a .BIT file into an on-board configuration PROM.
 - Programming a binary image into on-board SPI flash memory.
 - Reading the contents of a PROM chip back to a file.
 - Programming AVR microcontrollers.

The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:

 - xc3sprog is free software.
 - It is a command-line tool.
 - It works on Linux without the need to install binary "cable-drivers".
   (Although some types of JTAG cables need to load firmware.)
 - It uses an optional configuration file to recognize new JTAG devices.
 - It contains programming algorithms for the supported devices, enabling
   the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
   to intermediate SVF/STAPLE files).

Other Packages Related to xc3sprog

depends

recommends

suggests

enhances

dep: libc6 (>= 2.11) [hppa]

GNU C Library: Shared libraries
also a virtual package provided by libc6-udeb

dep: libc6 (>= 2.14) [amd64]

dep: libc6 (>= 2.16) [x32]

dep: libc6 (>= 2.17) [arm64, ppc64el]

dep: libc6 (>= 2.31) [sh4]

dep: libc6 (>= 2.34) [riscv64]

dep: libc6 (>= 2.7) [armel, armhf, i386, m68k, mips64el, ppc64, s390x, sparc64]
dep: libc6.1 (>= 2.31) [ia64]

GNU C Library: Shared libraries
also a virtual package provided by libc6.1-udeb

dep: libc6.1 (>= 2.34) [alpha]
dep: libftdi1-2 (>= 1.2)

C Library to control and program the FTDI USB controllers
dep: libgcc-s1 (>= 3.0) [not armel, armhf, hppa, ia64, m68k]

GCC support library

dep: libgcc-s1 (>= 3.5) [armel, armhf]

dep: libgcc-s1 (>= 4.2) [ia64]
dep: libgcc-s2 (>= 4.2.1) [m68k]

GCC support library
dep: libgcc-s4 (>= 4.1.1) [hppa]

GCC support library
dep: libstdc++6 (>= 5.2)

GNU Standard C++ Library v3
dep: libunwind8 [ia64]

library to determine the call-chain of a program - runtime
dep: libusb-0.1-4 (>= 2:0.1.12)

userspace USB programming library
dep: libusb-1.0-0 (>= 2:1.0.8) [hppa, m68k, sh4, sparc64]

userspace USB programming library

Download xc3sprog

Download for all available architectures
Architecture	Version	Package Size	Installed Size	Files
alpha (unofficial port)	0+svn795+dfsg-4	155.8 kB	1,080.0 kB	[list of files]
amd64	0+svn795+dfsg-4	156.4 kB	692.0 kB	[list of files]
arm64	0+svn795+dfsg-4	147.7 kB	676.0 kB	[list of files]
armel	0+svn795+dfsg-4	137.2 kB	596.0 kB	[list of files]
armhf	0+svn795+dfsg-4	139.7 kB	496.0 kB	[list of files]
hppa (unofficial port)	0+svn795+dfsg-4	157.6 kB	671.0 kB	[list of files]
i386	0+svn795+dfsg-4	163.6 kB	724.0 kB	[list of files]
ia64 (unofficial port)	0+svn795+dfsg-4	180.1 kB	1,083.0 kB	[list of files]
m68k (unofficial port)	0+svn795+dfsg-4	154.4 kB	787.0 kB	[list of files]
mips64el	0+svn795+dfsg-4	152.5 kB	815.0 kB	[list of files]
ppc64 (unofficial port)	0+svn795+dfsg-4	160.9 kB	1,076.0 kB	[list of files]
ppc64el	0+svn795+dfsg-4	163.2 kB	1,076.0 kB	[list of files]
riscv64	0+svn795+dfsg-4+b1	158.5 kB	613.0 kB	[list of files]
s390x	0+svn795+dfsg-4	143.9 kB	696.0 kB	[list of files]
sh4 (unofficial port)	0+svn795+dfsg-4	159.9 kB	664.0 kB	[list of files]
sparc64 (unofficial port)	0+svn795+dfsg-4	138.4 kB	718.0 kB	[list of files]
x32 (unofficial port)	0+svn795+dfsg-4	164.2 kB	684.0 kB	[list of files]