Pakiet: xc3sprog (0+svn795+dfsg-4) [debports]
Odnośniki dla xc3sprog
Zasoby systemu Debian:
Pobieranie pakietu źródłowego :
Nie znalezionoOpiekunowie:
Zasoby zewnętrzne:
- Strona internetowa [xc3sprog.sourceforge.net]
Podobne pakiety:
JTAG flashing tool for FPGAs, CPLDs and EEPROMs
xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.
The main features include:
- Reading a .BIT file from Xilinx design tools and programming it into an FPGA. - Reading a JEDEC file and programming it into a CPLD. - Programming a .BIT file into an on-board configuration PROM. - Programming a binary image into on-board SPI flash memory. - Reading the contents of a PROM chip back to a file. - Programming AVR microcontrollers.
The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:
- xc3sprog is free software. - It is a command-line tool. - It works on Linux without the need to install binary "cable-drivers". (Although some types of JTAG cables need to load firmware.) - It uses an optional configuration file to recognize new JTAG devices. - It contains programming algorithms for the supported devices, enabling the direct use of binary files (.BIT / JEDEC) from design tools (as opposed to intermediate SVF/STAPLE files).
Inne pakiety związane z xc3sprog
|
|
|
|
-
- dep: libc6 (>= 2.7)
- Biblioteka GNU C: biblioteki współdzielone
również pakiet wirtualny udostępniany przez libc6-udeb
-
- dep: libftdi1-2 (>= 1.2)
- C Library to control and program the FTDI USB controllers
-
- dep: libgcc-s1 (>= 3.0)
- Biblioteka wspomagająca GCC
-
- dep: libstdc++6 (>= 5.2)
- Standardowa biblioteka GNU C++, wersja 3
-
- dep: libusb-0.1-4 (>= 2:0.1.12)
- Biblioteka programowania USB w przestrzeni użytkownika
-
- dep: libusb-1.0-0 (>= 2:1.0.8)
- Biblioteka programowania USB w przestrzeni użytkownika
Pobieranie xc3sprog
Architektura | Rozmiar pakietu | Rozmiar po instalacji | Pliki |
---|---|---|---|
sparc64 (port nieoficjalny) | 138,4 KiB | 718,0 KiB | [lista plików] |