Package: xc3sprog (0+svn795+dfsg-3)

Links for xc3sprog

Debian Resources:

Download Source Package xc3sprog:

Maintainer:

Ricardo Ribalda Delgado (QA Page)

External Resources:

Homepage [xc3sprog.sourceforge.net]

Similar packages:

JTAG flashing tool for FPGAs, CPLDs and EEPROMs

xc3sprog is a suite of utilities for programming Xilinx FPGAs, CPLDs, and EEPROMs with the Xilinx Parallel Cable and other JTAG adapters under Linux. xc3sprog runs as a command-line application.

The main features include:

 - Reading a .BIT file from Xilinx design tools and programming it into an
   FPGA.
 - Reading a JEDEC file and programming it into a CPLD.
 - Programming a .BIT file into an on-board configuration PROM.
 - Programming a binary image into on-board SPI flash memory.
 - Reading the contents of a PROM chip back to a file.
 - Programming AVR microcontrollers.

The functionality of xc3sprog is similar to that of Xilinx IMPACT. There are also similarities with other free JTAG tools, such as UrJTAG. However, xc3sprog has a number of advantages:

 - xc3sprog is free software.
 - It is a command-line tool.
 - It works on Linux without the need to install binary "cable-drivers".
   (Although some types of JTAG cables need to load firmware.)
 - It uses an optional configuration file to recognize new JTAG devices.
 - It contains programming algorithms for the supported devices, enabling
   the direct use of binary files (.BIT / JEDEC) from design tools (as opposed
   to intermediate SVF/STAPLE files).

Other Packages Related to xc3sprog

depends

recommends

suggests

enhances

dep: libc6 (>= 2.14) [amd64]

GNU C Library: Shared libraries
also a virtual package provided by libc6-udeb

dep: libc6 (>= 2.17) [arm64, ppc64el]

dep: libc6 (>= 2.7) [not amd64, arm64, ppc64el]
dep: libftdi1-2 (>= 1.2)

C Library to control and program the FTDI USB controllers
dep: libgcc-s1 (>= 3.0) [not armel, armhf]

GCC support library

dep: libgcc-s1 (>= 3.5) [armel, armhf]
dep: libstdc++6 (>= 5.2)

GNU Standard C++ Library v3
dep: libusb-0.1-4 (>= 2:0.1.12)

userspace USB programming library

Download xc3sprog

Download for all available architectures
Architecture	Package Size	Installed Size	Files
amd64	156.1 kB	692.0 kB	[list of files]
arm64	147.8 kB	672.0 kB	[list of files]
armel	137.3 kB	592.0 kB	[list of files]
armhf	140.4 kB	492.0 kB	[list of files]
i386	164.1 kB	728.0 kB	[list of files]
mips64el	152.7 kB	815.0 kB	[list of files]
mipsel	151.4 kB	736.0 kB	[list of files]
ppc64el	163.3 kB	1,076.0 kB	[list of files]
s390x	143.9 kB	700.0 kB	[list of files]